
Summary
A Certificate of Analysis (COA) is a document that records test results for a particular food sample. For dried fruit importers, it helps assess whether a product meets agreed quality and safety specifications.
However, a COA should not be judged by its title or a simple “Pass” statement. Buyers should confirm that the report identifies the correct product and batch, includes relevant tests and units, provides measurable results, and uses appropriate acceptance limits. Laboratory details, sampling information and destination-market requirements also matter.
A COA is an important part of supplier verification, but it does not automatically guarantee that an entire shipment complies with every legal or commercial requirement.
Key Facts at a Glance
| COA element | What buyers should check | Why it matters |
|---|---|---|
| Product and batch identity | Product name, form and lot number | Confirms the report relates to the goods being purchased |
| Test results | Actual values, units and acceptance limits | Allows an objective comparison with the agreed specification |
| Moisture and water activity | Separate results where required | Helps assess product condition and stability |
| Microbiological tests | Organisms tested, results and sample quantity | Helps evaluate relevant biological hazards |
| Chemical tests | Pesticides, sulphites and other relevant contaminants | Supports market-specific compliance checks |
| Laboratory information | Laboratory name, methods and accreditation scope | Helps assess the reliability and relevance of the results |
| Dates and sampling | Sampling, testing and report dates | Helps establish whether the report is relevant to the shipment |
In this article
- Product identity and lot traceability
- Specifications, results and measurement units
- Moisture content and water activity
- Microbiological test results
- Pesticide residues, sulphites and other chemical tests
- Physical and sensory quality
- Laboratory credibility and sampling information
- A practical COA review checklist for importers
1. Product Identity and Lot Traceability
Before reviewing any test result, confirm that the COA belongs to the product and batch you intend to purchase.
A report may contain accurate laboratory results but still be unsuitable for a shipment if it refers to a different product form, production batch or formulation.
Check the following information:
- Product name: Is it dried mango, dried pineapple, dried banana, dried guava or another product?
- Product form: Does it identify slices, strips, cubes, pieces or another format?
- Ingredients and treatment: Where relevant, does it distinguish sweetened from unsweetened products or sulphur-dioxide-treated from untreated products?
- Batch or lot number: Does it match the batch information supplied by the exporter?
- Production date: Is the production period consistent with the goods being offered?
- Sample identification: Is there a sample number or reference that connects the report to the tested material?
For example, a buyer ordering unsweetened, no-added-SO₂ dried mango slices should not rely on a COA that only identifies the sample as “dried mango” without further clarification if the treatment and formulation affect the agreed specification.
The batch number should also be checked against relevant commercial and shipment records, including the product specification and packing information.
Buyer tip: If the COA does not clearly identify the lot, ask the supplier to confirm the connection between the tested sample and the goods offered before approving the report.
2. Specifications, Results and Measurement Units
One of the most important parts of a COA is the relationship between the required specification and the actual test result.
A useful report should make it possible to identify three things:
- Parameter: What was tested?
- Specification or acceptance limit: What result is required?
- Actual result: What did the laboratory or quality-control process find?
Consider this illustrative example:
| Parameter | Agreed specification | Reported result | Interpretation |
|---|---|---|---|
| Moisture | Max. 18.0% | 15.2% | Within the stated limit |
| Total sulphur dioxide | Max. 200 mg/kg | 145 mg/kg | Within the stated limit |
| Yeast and mould | Max. 1,000 CFU/g | 250 CFU/g | Within the stated limit |
These values are examples for explaining how to read a COA. They are not universal dried fruit standards or recommendations for every product or destination market.
If a report only says “Pass” without showing the applicable acceptance criteria, buyers may not have enough information to evaluate the result independently.
Pay attention to measurement units
Different tests use different units. Common examples include:
- %: Often used for moisture content.
- mg/kg: Commonly used for pesticide residues, sulphur dioxide and certain contaminants.
- CFU/g: Colony-forming units per gram, used for microbial counts.
- aw: A dimensionless value used for water activity.
- Absence in a specified sample quantity: A format sometimes used for pathogen testing.
Do not compare results until you have confirmed that the units and reporting basis are consistent.
Also check whether a result is reported as a measured value, a range, “Not Detected” (ND), or below a laboratory’s detection or quantification limit.
“Not Detected” does not necessarily mean that absolutely none of the substance is present. It means the substance was not detected under the stated analytical conditions. Ask for the relevant detection or quantification limit when it affects your acceptance decision.
3. Moisture Content and Water Activity
Moisture content is a key quality parameter for dried fruit, but buyers should understand that it is not the same as water activity.
Moisture content
Moisture content represents the amount of water in a food, commonly expressed as a percentage.
For dried mango, pineapple, banana and guava, moisture can influence:
- Texture and softness
- Product handling and processing
- Weight and yield
- Susceptibility to changes during storage
- Consistency between production batches
The acceptable moisture level depends on the fruit, product form, processing method, formulation and buyer specification.
Water activity (aw)
Water activity measures the availability of water in a food rather than its total water content. It is relevant to food stability because microorganisms respond to available water, not simply the total moisture percentage.
The US Food and Drug Administration’s technical guide on water activity explains the distinction and the relationship between water activity and food stability.
Two dried fruit products can have similar moisture content but different water activity because their ingredients and water-binding characteristics differ.
For buyers, this means:
- Do not assume that moisture content can be converted directly into water activity.
- Check whether the purchase specification requires both measurements.
- Review the actual results rather than relying on a general statement that the product is sufficiently dry.
- Consider the intended packaging and storage conditions when assessing product stability.
A COA that reports both moisture and water activity can provide a more complete picture when both parameters are relevant to the product specification.
4. Microbiological Test Results
Microbiological testing helps buyers evaluate relevant biological hazards and hygiene indicators.
The exact test panel should be based on the product, processing conditions, intended use, supplier risk assessment and destination-market requirements. Not every dried fruit product requires the same list of tests.
Common parameters that may appear on a dried fruit COA include:
| Test parameter | What it indicates |
|---|---|
| Total plate count / aerobic count | General level of culturable microorganisms under the stated test conditions |
| Yeast and mould | Levels of yeasts and moulds that may be relevant to spoilage and product quality |
| Coliforms or E. coli | Indicators used in certain hygiene assessments |
| Salmonella | Testing for a significant foodborne pathogen |
How to interpret the results
For microbial counts, the result is often expressed in CFU/g.
For example, a report might show:
- Yeast and mould: 250 CFU/g
- Total plate count: 3,000 CFU/g
These results should be compared with the applicable specification for the product. A lower result is not automatically proof of compliance if the buyer’s acceptance limit or required test method has not been considered.
For pathogen tests, the report may state “Not Detected” in a specified sample quantity. Buyers should check the tested portion, analytical method and reporting basis rather than treating the result as a guarantee that the entire shipment is free from the organism.
Important: A microbiological result applies to the sample tested. It does not independently establish the condition of every carton in a consignment.
5. Pesticide Residues, Sulphites and Other Chemical Tests
Chemical testing is particularly important when importing dried fruit into markets with specific residue, additive and contaminant requirements.
The tests requested should reflect the product’s ingredients, agricultural origin, processing method, intended use and destination market.
Pesticide residues
A pesticide residue report may cover multiple active substances. Results are commonly expressed in mg/kg.
Buyers should check:
- Which active substances were included in the analytical panel
- Whether the report lists individual results or only a summary
- The laboratory’s reporting limits
- Whether the relevant maximum residue levels (MRLs) were considered
- Whether the applicable commodity category and processing status are correct
For EU imports, pesticide MRLs are established for specific pesticide and commodity combinations. The European Commission explains that MRLs also apply to processed products, with adjustments where processing causes dilution or concentration.
Importers can consult the European Commission’s pesticide MRL information and database when checking the relevant product and active substance. The Codex pesticide residue database can provide an additional international reference, but Codex values should not automatically be treated as the importing country’s legal limits.
A report stating that a product is “pesticide-free” should be reviewed carefully. Buyers need to know which substances were tested and the analytical limits before drawing conclusions.
Sulphur dioxide (SO₂) and preservatives
Some dried fruits are treated with sulphites to help control discolouration and preserve appearance. Others are produced without added sulphur dioxide.
Where relevant, the COA should identify the measured total SO₂ result, usually expressed in mg/kg, and the buyer should compare it with the agreed product specification and applicable additive rules.
For the EU market, Regulation (EU) No 1169/2011 lists sulphur dioxide and sulphites above 10 mg/kg or 10 mg/litre, expressed as total SO₂, as substances that must be considered in allergen labelling. This is a labelling threshold, not a universal maximum permitted level for sulphites in every food. The applicable additive permissions and maximum levels must be checked separately.
See Regulation (EU) No 1169/2011, Annex II and Regulation (EC) No 1333/2008 on food additives.
Heavy metals and other contaminants
Depending on the product, market and buyer’s risk assessment, additional tests may cover specific heavy metals or other contaminants.
Do not assume that every contaminant test is required for every dried fruit. Ask which substances are relevant to the product and verify the corresponding legal or contractual limits.
The key principle is to request a test panel that is appropriate for the actual product and destination market, rather than relying on a generic COA template.
6. Physical and Sensory Quality
Not all important quality characteristics are measured through chemical or microbiological laboratory tests.
For dried fruit, buyers may also need to evaluate:
- Colour and appearance
- Cut size and shape
- Texture and flexibility
- Broken or damaged pieces
- Foreign matter
- Visible defects
- Aroma and taste
- Product uniformity
These characteristics are particularly important for wholesalers, snack brands and food manufacturers because they affect presentation, processing performance and consistency in the finished product.
For example, a buyer sourcing dried mango strips for retail snack packs may require consistent strip dimensions and appearance. A food manufacturer purchasing dried fruit pieces as an ingredient may place greater emphasis on cut size, moisture and processing suitability.
If physical or sensory criteria appear on the COA, confirm how they were assessed. A visual inspection by the supplier’s quality-control team is not necessarily the same as an independent laboratory analysis.
For this reason, importers may need both:
- A COA covering the agreed analytical parameters
- A product specification or inspection report describing physical and sensory requirements
Photographs, representative samples and pre-shipment inspection records can also support a more complete quality assessment.
7. Laboratory Credibility and Sampling Information
A COA is only as useful as the information behind it. Buyers should examine the issuing organisation, testing methods and sample details.
Check the laboratory
A report may be issued by the supplier’s internal quality-control department or by an external testing laboratory. Neither format should be judged solely by the document’s appearance.
For third-party testing, consider checking:
- Laboratory name and address
- Report number and issue date
- Analytical methods used
- Whether the laboratory is accredited to ISO/IEC 17025
- Whether the specific test is included in the laboratory’s accreditation scope
- Whether the relevant laboratory site is covered
An accreditation logo alone is not enough. The scope should cover the particular test being relied upon.
The International Laboratory Accreditation Cooperation (ILAC) explains how the ILAC Mutual Recognition Arrangement supports confidence in the results of accredited testing and inspection bodies across participating economies.
Accreditation supports confidence in technical competence for the activities within scope; it does not automatically mean every test performed by a laboratory is accredited or that a particular shipment is compliant.
Check the sample and testing dates
The following dates and details are useful:
- Sample collection date
- Sample receipt date
- Testing date or testing period
- Report issue date
- Sample identification
- Number of samples tested
- Sampling method or sampling plan, where available
A report from an earlier production batch may help demonstrate a supplier’s historical quality performance, but it should not automatically be accepted as evidence for a new lot.
For US importers subject to the Foreign Supplier Verification Programs (FSVP), FDA rules require risk-based supplier verification. Sampling and testing are among the available verification activities, and the documentation for such testing includes relevant information such as the food and lot identification, tests, methods, dates, results and laboratory identity. A supplier’s COA may contribute to the review, but it does not replace the importer’s wider FSVP responsibilities.
Refer to the FDA’s FSVP requirements and 21 CFR § 1.506.
8. A Practical COA Review Checklist for Importers
Before approving a dried fruit COA, buyers can use the following checklist to identify missing information and reduce the risk of misunderstandings.
Product and traceability
- Does the product name match the purchase order?
- Is the product form clearly identified?
- Are the ingredients and treatments consistent with the agreed specification?
- Does the batch or lot number match the goods offered?
- Are the production and sampling details available?
Test results
- Are the required parameters included?
- Are actual results shown instead of only “Pass”?
- Are acceptance limits stated or clearly referenced?
- Are measurement units consistent?
- Are analytical methods and reporting limits available where relevant?
- Are moisture and water activity reported separately if both are required?
Compliance and laboratory information
- Have pesticide residues been assessed against the correct market’s MRLs?
- Have SO₂ and additive results been reviewed against the applicable product and labelling requirements?
- Are relevant microbiological and contaminant tests included?
- Is the issuing laboratory identifiable?
- Is the accreditation scope relevant to the tests being relied upon?
- Is the report sufficiently recent and representative of the lot?
What should buyers do when information is missing?
If the COA does not provide enough information, do not automatically approve or reject the goods. First, identify the specific gap and request clarification.
Depending on the issue, the next step may be to:
- Request a revised or more detailed COA.
- Ask for the underlying laboratory test report.
- Request confirmation of the lot number and sample identity.
- Ask for the analytical method or detection limit.
- Arrange additional sampling or independent testing if the risk justifies it.
- Hold final quality approval until significant discrepancies have been resolved.
This approach helps buyers make decisions based on documented evidence rather than assumptions.
Frequently Asked Questions (FAQs)
1. What is a COA for dried fruit?
A Certificate of Analysis is a document reporting the results of tests conducted on a dried fruit sample. It may include moisture, water activity, microbiological parameters, pesticide residues, sulphur dioxide and other agreed quality or safety tests.
2. Does every dried fruit shipment need a new COA?
There is no single universal rule that every dried fruit shipment must have a newly issued COA. Requirements depend on applicable regulations, buyer specifications, contractual agreements and the importer’s verification programme. Buyers should confirm whether the report must be specific to each production lot.
3. Is a COA the same as a product specification?
No. A product specification describes the required characteristics and acceptance limits. A COA records the results obtained from testing a sample. Buyers should compare the COA against the agreed specification to assess whether the reported results meet the requirements.
4. Does an ISO/IEC 17025-accredited laboratory guarantee that a product is compliant?
No. Accreditation provides confidence in a laboratory’s technical competence for tests within its accredited scope. Buyers must still confirm that the correct product and lot were tested, that the methods are appropriate, and that the results meet the applicable requirements.
5. What should buyers do if a COA shows “Not Detected”?
Check the analytical method and the laboratory’s detection or quantification limit. “Not Detected” means the substance was not detected under the conditions of that test; it does not necessarily mean absolute zero.
6. Are moisture content and water activity interchangeable?
No. Moisture content measures the total water present, while water activity relates to the availability of water in the food. They provide different information and should be reviewed separately when both are part of the buyer’s specification.
Conclusion
Reading a dried fruit Certificate of Analysis involves more than checking whether the results are marked “Pass.” Importers should verify product identity, batch traceability, test parameters, measurement units, acceptance limits, laboratory information and the relevance of the results to their destination market.
A well-reviewed COA supports more informed purchasing decisions, strengthens supplier verification and helps buyers identify potential quality or compliance issues before shipment approval.
For international B2B buyers, the most effective approach is to evaluate the COA together with the product specification, sampling information and other relevant supplier documentation.
Looking for a reliable supply of dried fruit?
References and Further Reading
- U.S. FDA — Foreign Supplier Verification Programs (FSVP).
- Electronic Code of Federal Regulations — 21 CFR § 1.506: Foreign Supplier Verification Activities.
- U.S. FDA — Water Activity (aw) in Foods.
- European Commission — Maximum Residue Levels for Pesticides.
- European Union — Regulation (EU) No 1169/2011.
- ILAC — Mutual Recognition Arrangement and Signatories.